Your cart is empty
The best way to clean a firearm depends on the type of firearm and the specific cleaning needs. However, there are some general steps that can be followed for most firearms:
1. Unload the firearm: Before cleaning any firearm, it is absolutely essential to ensure that it is unloaded and that there is no ammunition in the chamber or magazine.
2. Disassemble the firearm: Depending on the type of firearm, you may need to disassemble it to access all the parts that need to be cleaned. Consult the manufacturer's instructions for the proper disassembly procedure.
3. Clean the barrel: Use a cleaning rod and a bore brush to scrub the inside of the barrel. There are many different solvents and cleaning agents available for this purpose, (we use Ballistol) but make sure to use one that is appropriate for your firearm. Run several patches through the barrel until they come out clean.
4. Clean the other parts: Use a solvent to clean the other parts of the firearm, such as the bolt, trigger group, and slide. Scrub them with a brush and then wipe them down with a clean cloth.
5. Lubricate the firearm: After cleaning, it is important to lubricate the moving parts of the firearm with an appropriate oil or grease.Again we use Ballistol but consult the manufacturer's instructions for the proper lubrication procedure.
6. Reassemble the firearm: Once all the parts have been cleaned and lubricated, reassemble the firearm according to the manufacturer's instructions.
7. Perform a function check: Before putting the firearm away, perform a function check to ensure that everything is working properly.
It is important to note that firearm cleaning should always be done in a well-ventilated area and that appropriate safety measures should be taken. Additionally, it is important to follow the manufacturer's instructions for cleaning and maintenance to ensure the safe and proper functioning of the firearm.